Summer Starts Here - Save up to 70%
Thule Big Mouth Roof Bike Rack Review - 2013 Chevrolet Cruze- Video
Today on our 2013 Chevy Cruz we'll be test fitting the Thule Bigmouth roof mounted bike rack, part number TH599XTR. We'll begin our test fit by placing the bike rack onto the vehicle's load bars. Starting with the rear we'll remove one of the wing nuts to position the rear bracket around the underside of the rear bar. We can then reinstall our wing nut and then slide it down. Moving up to the front, we can loosen up the black wing nuts to position the T-bolts into the slots of the brackets. We'll then tighten down the wing nuts and secure the front part of the bike rack to the front bar. Now that everything is all tightened down and secured, we're ready to load up our bike. We'll undo the strap at the front and the rear and then loosen up the frame clamp. more
9/12/2013 9:23:42 AM
Yakima FrontLoader Roof Bike Rack Review - 2012 Chevrolet Camaro- Video
Today on our 2012 Chevrolet Camaro we'll be test fitting the Yakima, Wheel Mount bike carrier, part number y02103. The the Yakima roundbar roof rack system assembled onto our vehicle, we'll begin our test fit by placing our front loader directly onto our crossbars. We'll go ahead and fit the front and rear clamps around each bar. Then here at the front, we'll tighten the T handle until our handle is tight around our front crossbar. Now, we'll move to the rear and drop our T bolt through the appropriate slot and tighten with a T nut on top. We'll want to make sure that we get that all the way tightened down. With our front and rear clamps secured, we can then open the wheel loop at the front of our carrier and undo the rear wheel strap. more
9/4/2013 11:52:49 AM
Yakima ForkLift Roof Mounted Bike Rack Review - 2012 Chevrolet Camaro- Video
Today, on our 2012 Chevrolet Camaro, we'll be test-fitting the Yakima ForkLift Roof Mounted Bike Carrier, part number Y02098. With a Yakima Round Bar Roof Rack System installed on our vehicle, we'll begin our test-fit by placing the ForkLift directly onto our cross bars. Here at the front, we'll go ahead and feed our clamp around our front bar. We want to make sure that we drop the T-bolt through the slot, and then tighten withthe T-handle. We'll want to get that clamp tight around our bar. Then, we can slide up our slotted bracket around our T-handle and install our skewer. more
9/4/2013 11:52:01 AM
Yakima FrontLoader Roof Bike Rack Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado we'll be test fitting the Yakima FrontLoader Wheel Mount Bike Rack, part number y02103. With the Yakima Round Bar Roof Rack System assembled onto our vehicle we'll begin our test fit by placing the FrontLoader directly onto our crossbars. Here at the front we'll place our front bracket system around our front bar and use the black T-handle at the front of the carrier to secure it around our front bar. We can then move to the rear and bring our bracket around the rear bar. We'll place the T-bolt through the appropriate slot and then tighten it down. We want to make sure that the wheel strap at the rear is undone and the front wheel loader is set in place. more
8/23/2013 1:21:50 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado we'll be test fitting the Yakima Forklift Roof Mounted Bike Rack, part number y02098. With the Yakima Round Bar Roof Rack System assembled onto our vehicle we'll begin our test fit by placing the Forklift directly onto our crossbars. Here at the front we need to first remove the skewer. Then we can bring our front clamp around our front bar. We'll fit the T-bolt through the appropriate slot and tighten it down with our hands. Once we have that tight and our T-handle in line with our bike rack we can then slide the black bracket up around our T-handle. more
8/22/2013 3:26:43 PM
Thule Big Mouth Roof Bike Rack Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado, well be test fitting the Thule Big Mouth Roof Mounted Bike Rack, part number TH599XTR. With the Thule square load bar system assembled on to our vehicle, well begin our test fit by placing the big mount directly on to our load bars. Here at the front, we need to bring our front brackets around our front bar to fit the T-holes in their appropriate slot and then tighten the wing nuts on the top of the platform. Well do this for both clamping system then our form platform. Here at the rear, well undo both wing nuts and remove the clamp. Well bring our two bolts around our rear bar, reinstall the black metal clamp and secure it in place with the wing nuts. more
8/22/2013 10:58:15 AM
Thule Domestique Roof Bike Rack Review - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado, we'll be test fitting the Thule Domestique roof-mounted bike carrier, part number TH513. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll then remove the skewer, allowing us to access the two front bolts at the head of the carrier. We'll then loosen up the bolts at the front of the carrier, as well as the rear of the carrier, to bring both brackets underneath the front and rear load bar. Once we have the brackets in place, we can then use the Allen key to tighten down the Allen bolts to bring the brackets up tightly around the load bars. Once everything is secure and tightened down, we're ready to load up our bike. more
8/20/2013 3:38:47 PM
Swagman Fork Down Roof Bike Rack Review - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado, we'll be test fitting the Swagman Fork Down roof-mounted bike carrier, part number S64710. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll then take the two silver brackets to bring around the underside of the front load bar and use the black wing nut to thread onto the bracket to secure the front of the carrier to the front load bar. We'll then move to the rear, where this time we'll slide the black bracket onto the top of the rear load bar and insert the black plate onto the threads of the downward bolt. We'll then thread on our black wing nut to secure the rear of the carrier to the rear load bar. Now with everything secured and tightened down, we're ready to load up our bike. more
8/20/2013 3:33:54 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado, we'll be test fitting the RockyMounts Tierod Stretch roof-mounted bike carrier, part number RKY1011. We'll begin our test fit by first placing the carrier onto the vehicle's load bars. We'll remove the black plastic cover at the head of the carrier to bring the rubber-coated steel straps around the underside of the front load bar. We then can move to the rear, where we will loosen up the Allen bolt to bring the rear bracket around the underside of the rear load bar. We'll then thread in the Allen bolt through the bracket and tighten it down with a wrench. Now with the rear secure, we'll head back up to the front of the carrier, where we'll use the Allen key to turn the silver bolt at the head of the carrier to bring the straps up around tightly against the front load bar. more
8/20/2013 3:27:57 PM
Yakima FrontLoader Roof Bike Rack Review - 2011 Chevrolet Equinox- Video
Today on our 2011 Chevrolet Equinox well be test fitting the Yakima Front Loader Roof Mounted Bike Rack part number Y02103. Well begin our test fit by placing the bike rack onto the vehicles crossbars. Well loosen up the black key handle at the front to bring the front bracket on the front crossbar. Well then tighten it down. Well move to the rear and adjust the rear bracket to fit on the underside of the rear crossbar, insert the silver key bolt and tighten down the black wing nut. Now with everything all tightened down and secured, were ready to load up our bike. more
8/15/2013 4:19:29 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2011 Chevrolet Equinox- Video
Today on our 2011 Chevy Equinox well be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Rack part number RKY1011. Well begin our test fit by placing the bike rack onto the vehicles crossbars. Well remove the black plastic cover at the front to bring the rubber coated steel straps around the underside of the front crossbar. Well them move to the rear and loosen up the Allen bolts to bring the rear bracket around the underside of the rear crossbar. Well then use the included Allen key to turn the Allen bolts to bring the bracket up around tight against the bar. Well then move back up to the front and again using the included Allen key to turn the silver bolt to bring the straps up around tightening this bar. more
8/15/2013 3:56:23 PM
Thule Big Mouth Roof Bike Rack Review - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado 3500 Series, we'll be test fitting the Thule Big Mouth roof-mounted bike rack, part number TH599XTR. With the Thule square bar roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Big Mouth directly onto our load bars. Here at the front, we'll loosen up the clamps so that we can bring them around our front bar. We'll put the bolts back through the appropriate slots on the clamp, and use the wing nuts at the top to tighten it down. Once we have the front secured, we can move to the rear. We'll undo the wing nuts, remove our bracket, and then fit our clamp around our rear bar. more
8/9/2013 12:06:58 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Yakima Forklift Roof Mounted Bike Carrier, part number y02098. Now to begin our test fit well place the carrier onto the vehicles crossbars. Well bring the front bracket around the front crossbar and insert the t-bolt through the underside of the bracket and tighten down the wing nut to secure the front of the carrier to the vehicle. We will then move to the rear of the carrier where we will bring that bracket around the underside of the rear crossbar, insert the t-bolt, and turn the black wing nut to tighten the rear of the carrier to vehicles crossbars. Now with the carrier secured to the vehicle, were ready to load our bike. Well loosen up the skewer as well as the rear tray strap. more
5/28/2013 4:57:29 PM
Thule Domestique Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the Thule Domestique roof-mounted bike carrier, part number TH513. Now, to begin our test fit well place the carrier onto the vehicles crossbars. We will remove the skewer to expose the two front Allen bolts. Well loosen up the Allen bolts to bring the front bracket around the front crossbar. Well then tighten it down to secure the front of the carrier to the front crossbar. We will then move to the rear of the carrier where we will loosen up those Allen bolts to bring that bracket around the underside of the rear crossbar and tighten it down to secure the carrier to the vehicle. more
5/28/2013 4:51:54 PM
RockyMounts TieRod Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe well be test fitting the RockyMounts TieRod roof-mounted bike carrier, part number RKY1014. To begin our test fit, well place the carrier onto the vehicles crossbars. We will remove the front black plastic cap to bring the rubber coated steel straps around the front crossbar. Well then move to the rear of the carrier where we will loosen up the Allen bolts to bring the bracket around the underside of the crossbar. Well then move back up to the front of the carrier where we will hook the straps into position and use the Allen wrench to tighten up the straps that secure the front of the carrier to the front crossbar. Well then move to the rear of the carrier where we will tighten up the Allen bolts securing that bracket to the rear crossbar. more
5/28/2013 4:46:23 PM
Yakima FrontLoader Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe will be test fitting the Yakima FrontLoader Roof Mount and Bike Carrier, part number Y02103. To begin our test fit well place the carrier on to the vehicles crossbars. Well loosen up the black T-handle on the front of the carrier to bring the clause around the front crossbar. Well then tighten it down to secure the front of the carrier to the front crossbar. Well then move to the rear of the carrier where we will loosen up the black T-handle to bring the bracket around the underside of the rear crossbar. Well then insert the T-bolt and turn the black T-handle to tighten down the bracket to secure it to the rear crossbar. Now, the carrier secure to the vehicle were ready to load our bike. more
5/21/2013 1:32:09 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevy Tahoe, we'll be test fitting our RockyMounts TieRod Stretch Roof Mounted Bike Carrier, part number RKY1011. To begin our test fit, we'll place the carrier onto the vehicle's crossbars. We will remove the front black plastic cap to bring the rubber coated steel straps around the front crossbar. We'll then move to the rear of the carrier where we will loosen up the Allen bolts to bring that bracket around the rear crossbar. We'll then tighten on those Allen bolts to secure the rear of the carrier to the vehicle. We'll then move back up to the front of the carrier where we will tighten down the rubber coated steel strap to the front crossbar. more
5/20/2013 3:58:12 PM
Thule Domestique Roof Bike Rack Review - 2011 Chevrolet Equinox- Video
Today on our 2011 Chevy Equinox, we'll be test fitting the Thule Domestique Roof Mounted Bike Carrier, part number TH513. Now with our Thule roof rack system already assembled onto our vehicle, we'll set the carrier onto the load bars and we can use the Allen key to tighten them both down. In order to tighten down the front part of the carrier, you must remove the skewer first. It's important the carrier is perpendicular to the load bars and parallel to the vehicle to ensure that the brackets have the proper fit onto the load bars. Once you have the brackets tightened down and secured to the vehicle, we're now ready to load our bike. We'll undo the wheel strap at the rear and insert the skewer into the front of our bike rack. more
4/10/2013 3:02:37 PM
RockyMounts TieRod Roof Bike Rack Review - 2011 Chevrolet Equinox- Video
Today on our 2011 Chevy Equinox, we're going to be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. To install the carrier, set it on top of our load bars. Feed the straps at the head of the bike carrier around of the front bar, lock them back into the head, and use an Allen key to tighten them down. Now, it's time to reinstall the cover on the head of the bike rack. At the back, well use a clamp and we'll tighten it down by using the Allen key. Once we've done that, we're ready to load up our bike. more
4/10/2013 3:02:29 PM
Yakima FrontLoader Roof Bike Rack Review - 2013 Chevrolet Cruze- Video
Today on our 2013 Chevy Cruze, well be test fitting the Yakima Front Loader Roof Mounted Bike Carrier, part number Y02103. Now with our roof rack system already assembled onto the vehicle, well begin our test fit by placing the carrier onto the vehicles crossbars. Well set the front of the carrier around the front crossbar and loosen up the rear bracket to bring it around the rear crossbar. Well then tighten down the rear bracket and move back up to the front of the carrier where we will turn the black T-handle to tighten down the front of the carrier to secure it to the crossbar. Now with the carrier secured to the vehicle, were ready to load our bike. Well first undo the rear strap and sat our bike onto the carrier. more
3/29/2013 10:27:10 AM
Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Cruze- Video
Today on our 2013 Chevy Cruise, we'll be test fitting the Yakima Forklift roof mounted bike carrier, part number Y02098. Now with the roof rack system already assembled on our vehicle, we'll begin our test fit by placing the carrier onto the vehicle's cross bars. We'll bring the front bracket around the front cross bar and tighten down the black wing nut to secure the front of the carrier to the cross bar. We'll then move to the rear of the carrier, where we will tighten down the black wing nut to secure the rear of the carrier to the vehicle. We'll then move back up to the front of the carrier, where we will remove the skewer. After tightening the wing nut, slide the black plastic cap back onto the carrier, and slide the skewer through. more
3/28/2013 2:41:35 PM
RockyMounts TieRod Roof Bike Rack Review - 2013 Chevrolet Cruze- Video
Today on our 2013 Chevrolet Cruse, well be test fitting the RockyMounts Tierod Roof Mounted Bike Carrier, part number RKY1014. Now with our roof rack system already assembled onto the vehicle, well begin our test fit by placing the carrier onto the vehicles crossbars. Well remove the front black plastic cap to swing the rubber coated steel straps around the front crossbar and well then use the on wrench to tighten them down to secure the front of the carrier to the vehicle. Well then replace the black plastic cap and move to the back of the carrier where we will loosen up the Allen bolts to bring that bracket around the rear crossbar. Well then tighten that down to secure the carrier to the vehicle. Now were ready to load our bike. more
3/28/2013 2:39:49 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2010 Chevrolet Cobalt- Video
Today on our 2010 Chevy Cobalt, well be test fitting the Yakima Forklift Roof Mounted Bike Carrier, part number Y02098.Now to begin our test fit, we'll set the carrier onto the vehicles crossbars. We'll move to the front of the carrier where we'll loosen up the front bracket and bring it around the underside of the front crossbar. We'll loosen up the black wing nut to allow us to do this.We'll then move to the rear of the carrier where we will again loosen up the black wing nut, bring the bracket around the rear of the crossbar. We'll then tighten down the black wing nut to secure the rear of the carrier to the vehicles rear crossbar.We will then move back up to the front of the vehicle, where we will loosen up the skewer. The skewer of this carrier does have reverse threads. After removing the skewer, itll allow us to slide the black cap back to have access to the wing nut. more
3/20/2013 2:59:31 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Equinox- Video
Today on our 2013 Chevrolet Equinox well be test fitting the Yakima Forklift Roof-mounted Bike Carrier, part number Y02098.Now, with our vehicle already equipped with a roof-rack, were ready to fit the forklift to the vehicle. Well place the bike rack on top of our crossbars and align the two mounts with our crossbars. Here on the front, well bring the head of the bike rack directly over the front crossbar and make sure that the clamp goes underneath.We can then use the wing nut to slide the bolt through the clamp and tighten it down. Well then slide the back of the head forward to lock the front wing nut in place. Well move to the back mount where well make sure that the clamp goes underneath the crossbar and tighten it down.Well then install our skewer. With the skewer in place and opened up ready for the fork of our bike, well make sure that our rear wheel strap is undone and out of the way.We can then place the bike into the bike rack making sure the front fork falls into the skewer. more
11/27/2012 7:52:17 AM
Thule Domestique Roof Bike Rack Review - 2011 Chevrolet Malibu- Video
Today on our 2011 Chevrolet Malibu, we'll be test fitting the Thule Domestique Fork Mounted Bike Carrier, part number TH513. We can take our carrier and set it up on top of our vehicle. We'll fit the front clamp around the bar and use an Allen key to tighten the bolt at the rear. We can then also snug up the front tube bolts as necessary. Now, we can reinstall our skewer and prepare to mount our bike. We want to make sure that the skewer is open and the wheel strap at the back of the carrier is also open. more
10/19/2012 1:41:00 PM
RockyMounts TieRod Roof Bike Rack Review - 2011 Chevrolet Malibu- Video
Today on our 2011 Chevrolet Malibu, we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. To mount our carrier to the vehicle, we'll set it up on top of our load bars. We'll fit the rubber coated steel straps at the front around the front bar and fit them back into the head. We'll use an Allen Key to tighten the bolt and pull the straps snugger on the bar. We can then reinstall our front cover. We also want to make sure that our skewer is unlocked and open. more
10/19/2012 1:39:48 PM
RockyMounts TieRod Roof Bike Rack Review - 2009 Chevrolet Cobalt- Video
Today on our 2009 Chevrolet Cobalt Two-Door, we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. We'll take our carrier and set it up on top of our crossbars. At the front, we want to make sure to fit the head properly over the front crossbar and feed the straps around the bar. We'll fit them back into the head and use the Allen key to tighten them down. We'll then reinstall our cover and then make sure that the skewer is open. At the rear of the carrier, we'll fit our clamp around the bar and use the wing nuts to tighten it down. more
10/19/2012 1:38:41 PM
Yakima FrontLoader Roof Bike Rack Review - 2012 Chevrolet Colorado- Video
Today on our this 2012 Chevrolet Colorado we are going to be testing the Yakama front loader roof mounted bike carrier for part number y02103. To mount this bike area up on top of our vehicle we are going to set it on top of the front crossbars. Well the hand know on the front of the bike rack to tightened down the front clamp around the cross bar. In the rear, we are going to use the wing nut, T-Bolt and clamp to secure the rear half of the bike rack around our rear bar. With both clamps secure, our bike rack is mounted and we are ready to load up. To load our bike rack the first thing we need to do is open up the front wheel hoop all the way. more
4/30/2012 3:34:19 PM
RockyMounts TieRod Roof Bike Rack Review - 2012 Chevrolet Malibu- Video
Alright, today in this 2012 Chevrolet Malibu, we're going to test fit the TieRod Bicycle Rack from RockyMounts, product number RKY1014. This bike rack will fit a variety of low bars. In this case, we'll be using elliptical-shaped bars. This will also work with round and square bars. So they're easy-to-install racks so we'll get right to it. We'll take the front end of the rack and slide the straps underneath the crossbar until it catches on the other side, and then we'll install a clamp on the back crossbar. more
1/12/2012 3:25:52 PM
RockyMounts TieRod Roof Bike Rack Review - 2004 Chevrolet Cavalier- Video
Alright, today on this 2004 Chevrolet Cavalier we're going to do a test fit of a TieRod Bicycle Rack from RockyMounts. This is product number RKY1014. Alright, now our car's been equipped with the square crossbars on it, so it's just a matter of attaching our bike rack. We'll take the straps located at the front. We'll run them around the crossbar into the hatch at the front. And then we'll go ahead and slide our clamp through the crossbar into place. more
1/5/2012 8:41:05 AM
Thule Domestique Roof Bike Rack Review - 2004 Chevrolet Cavalier- Video
Alright, today on this 2004 Chevrolet Cavalier, we're going to do a test fit of product number TH513 from Thule. This is the Domestique Bicycle Rack. Now, the car has already been outfitted with a Thule Roof Rack System with the square bars. We're also going to start our bike rack assembled according to instructions. So we can go straight to mounting the bicycle rack to the crossbars. We'll start off by taking the front clamp, put in the crossbar, then we'll slide our second clamp in position and around the second crossbar. more
1/5/2012 2:45:47 AM
Yakima FrontLoader Roof Bike Rack Review - 2011 Chevrolet Aveo- Video
Today on this 2011 Chevrolet Aveo, were going to test fitting the Yakima front loader roof mounted bike rack, park number y02103. our Aveo already has the Yakima roof rack system on it so were ready to go ahead and mount our front loader. Well position the 2 clamps on the front loader on top of our crossbars. With our bike rack in place on our roof where we want it, we can go ahead and being tightening the clamps down. With the 2 clamps tightened down the bike rack is already installed and were ready to mount up a bike. Now our bikes loaded and were ready to hit the road. more
12/12/2011 4:03:15 PM
Thule Domestique Roof Bike Rack Review - 2012 Chevrolet Malibu- Video
Alright, today in this 2012 Chevrolet Malibu, we're going to do a test fit of the Thule Domestique Bicycle Rack, product number TH513. A couple of quick notes about the bicycle rack is that will fit square bars, fit round bars and electrical bars as well. In this case on our car, we already have a Thule Roof Rack installed with the square bars. We'll go ahead and start off with our bike rack assembled according to instructions and we're going to put it into place. We'll take the front clamp, put around the front crossbar, and then we'll slide the second clamp over the second crossbar, ok. And then we'll go ahead and get the hardware started to clamp it to the back as well as to the front. more
12/8/2011 4:23:40 PM
Filter Videos
Filter Videos
